油壓幫浦

電動油壓幫浦

GEP-750  電動式油壓幫浦

GEP-750D  雙迴路油壓電動幫浦

手動油壓幫浦

GHP-900

GHP-2100

分離式油壓工具

GO-400A

GO-400B

WITH HEXAGONAL DIES
FOR NON-INSULATED TERMINAL UP TO 400mm²

GO-630

FOR DISTRIBUTION AND TRANSMISSION LINES UP TO 630mm²

GYO-412B

30mm JAW OPENING
FOR NON-INSULATED TERMINAL UP TO 400mm²

GO-1000

FOR DISTRIBUTION AND TRANSMISSION LINES UP TO 1000mm²

GO-500

FOR DISTRIBUTION AND TRANSMISSION LINES UP TO 630mm²

手動直接式油壓壓著工具

GPO-150D

FOR NON-INSULATED TERMINAL UP TO 185mm²

GYO-240

WITH INDENT DIES
FOR NON-INSULATED TERMINAL UP TO 240mm²

GYO-413A

FOR CRIMPING CONNECTOR UP TO 400mm²
●38mm JAW OPENING
●FIBERGLASS HANDLES
●HYDRAULICNCRIMPING TOOLS 180° DERGEE ROTATABLE

GYO-412A

FOR CRIMPING CONNECTOR UP TO 400mm²
●30mm JAW OPENING
●FIBERGLASS HANDLES
●HYDRAULICNCRIMPING TOOLS 180° DERGEE ROTATABLE

GPO-400A

WITH INDENT DIES
FOR NON-INSULATED TERMINAL UP TO 400mm²

GPO-400B

FOR NON-INSULATED TERMINAL UP TO 185mm²

油壓電纜剪

GPC-400A

HAND HYDRAULIC CUTTER TWIN STAGE HYDRAULIC CUTTER DESIGN FOR CUTTING COPPER, ALUMINUM, ACSR, ALUMINUM STEEL CABLE, STEEL ROPES AND RODS.

GPC-85A

HAND HYDRAULIC CUTTER TWIN STAGE HYDRAULIC CUTTER DESIGN FOR CUTTING COPPER AND ALUMINUM CABLE AND TELEPHONE CABLE.

GPC-85B

HYDRAULIC CUTTER HEAD DESIGN FOR CUTTING COPPER AND ALUMINUM CABLE AND TELEPHONE CABLE.

GPC-400B

HYDRAULIC CUTTER HEAD DESIGN FOR CUTTING COPPER, ALUMINUM, ACSR, ALUMINUM STEEL CABLE, STEEL ROPES AND RODS.

GPC-30B

HAND HYDRAULIC CUTTER TWIN STAGE HYDRAULIC CUTTER DESIGN FOR CUTTING COPPER AND ALUMINUM CABLE AND TELEPHONE CABLE.

GPC-100B

HYDRAULIC CUTTER HEAD DESIGN FOR CUTTING COPPER AND ALUMINUM CABLE AND TELEPHONE CABLE.

GC-32B+A

HYDRAULIC CUTTER HEAD DESIGN FOR CUTTING COPPER AND ALUMINUM CABLE AND TELEPHONE CABLE.

GC-50B+A

HYDRAULIC CUTTER HEAD DESIGN FOR CUTTING COPPER AND ALUMINUM CABLE AND TELEPHONE CABLE.

油壓切孔工具

GC-104 Ⅰ 油壓切孔工具

使用範圍：鐵板厚度 3.2mm (1/2″-2″)

白鐵厚度 1.6mm

HYDRAULIC PUNCHER TOOL

USE TO PUNCH ELECTRICAL PANELS, SWITCHBOARDS AND OTHERS.

PUNCH CAPACITY IS UP THROUGH 3.2mm MILD STEEL.

INCLUDE : PUNCH DRIVE.

PUNC AND DIE 1/2″(22 mm), 3/4(27.5 mm), 1″(34.3 mm), 1 1/4″(43 mm), 1 1/2″(49 mm), 2″(60.8 ).

2 PCS OF DRAW STUDS WITH DRAW STUD ADAPTORS.

WEIGHT: 7 kg

GC-104 Ⅱ  油壓切孔工具

使用範圍：鐵板厚度 3.2mm (2 1/2″-4″)

白鐵厚度 1.6mm

HYDRAULIC PUNCHER TOOL

INCLUDE : PUNC AND DIE INCLUDE: 2 1/2″(76.6mm), 3″(89.4 mm), 3 1/2″(102.6 mm), 4″(115 mm) 1 PC OF DRAW STUD AND HEXAGONAL NUT.

WEIGHT: 12 kg

GB-200  銅鋁板油壓曲板

GC-6  銅鋁板油壓沖孔工具

*另可訂製橢圓形模具

GWC-150 銅鋁板油壓切板工具

不銹鋼管壓接工具

GBS-25A 尖嘴式

●COMPRESSION DIE SIZES (3 SETS) : 13SU ^1/2” , 20SU ^3/4”, 25SU ^1”

●WEIGHT : 7 kg

GBS-25B 開嘴式

●COMPRESSION DIE SIZES (3 SETS) : 13SU ^1/2” , 20SU ^3/4” , 25SU ^1”

●WEIGHT : 3 kg

GBL-60

●COMPRESSION DIE SIZES (4 SETS) : 30 SU 1 ^1/4” , 40SU 1 ^1/2” , 50SU ^2” , 60SU 2 ^1/2”

●WEIGHT : 11.5 kg

電纜線放線架

GRS-5A 卧式放線盤

▲能力： 800 kg

▲尺寸： 450×760 m/m

GRS-8 電纜輪油壓放線架

▲能力： 3 Ton （可換5 Ton 軸心）

▲最低： 450 m/m

▲最高： 700 m/m

▲保固二年，另有次級品CRS-2

鋁合金模具油壓彎管機

GPB-3

GPB-4

• 配合手動棒浦或電動邦浦操作使用
• 適用於屋內電器或是水管配管工程使用
• 管徑2吋以下可以一次彎曲到90度
• 材質用強韌鋁合金重量輕彎管平滑操作方便、另可選購鑄鋼彎管模
• 2 1/2 吋～4吋一次彎曲90度需另外訂購